Super Anchor 1093 2" Stud Mount Loop Top

SKU 1093-R

This Pre-Engineered permanent Cast Loop Top Fixtures can be used in a variety of applications. Wall and ceiling applications are the idea with these anchors. Very low profile and installed with bolts, welds or nuts. These are designed as a single user fall protection anchor point, a window-washing suspension/tie-back anchor point or as a horizontal lifeline intermediate anchor. CRA Overview (see the Instruction/Specification Manual for details):

  • DECKING ATTACHMENTS: Wood Decking, Metal Decking, Existing Concrete Decks, Pour-In Place Concrete Decks, Structural Wood Beams and Structural Steel
  • ATTACHMENT HARDWARE: 5/8”” Grade-8 Bolts, A-307 Threaded Rod and Field Welds
    • Bolt-On Attachment using 5/8”-11 x___ grade 8, 18-2 Stainless Steel or A-307 All Thread
    • Weld-On Attachment using Welding Specifications per Instruction Manual
    • Stud-Bolt Attachment using 5/8”-11 nut and washer
    • #1090. 2-5/8” Outside Diameter with 1-3/8” Inside Diameter. 5,000-pound rating
    • #1093. 4” Outside Diameter with 2.0” Inside Diameter. 10,000-pound rating
    • Raw Uncoated A-36 Steel
    • ASTM 123 Hot Dip Galvanized
    • 316 Grade Stainless Steel
    • Closed Cast Loop Top
    • Open Pass-Through Top for Pass Through cable systems
    • Through bolt and Stud bolt label package
    • Hex head bolt attached label direct to anchors
    • Provisional tether strap/zip tie to loop top

Super Anchor Safety offers 2 proprietary loop top and pass through designs with several attachment options that comply with US fall protection standards. This is the same design that we use on our CRA, CRZ and CRO commercial roof anchors and risers. These fixtures are made with high strength cast steel and 316 stainless steel. For your assurance, our loop tops are 3rd party tested and certified for personal fall protection and horizontal lifeline systems. This product is a Super Anchor exclusive that you won’t find anywhere else.

  • Field Weld, Bolt Through or Stud Bolt Attachment
  • Raw, Hot Dip Galvanized or 316 Grade Stainless Steel
  • 3rd Party Certified Models #1090 for 5,000 Tensile Strength
  • 3rd Party Certified Models #1093 for 10,000 Tensile Strength
  • Streamlined Cast Steel Design
  • Permanent Stamp Marks for Traceability
  • Certification and Test Documents Available
  • 1090-1093 Models Comply with IWCA 1-14.1 Window Washing Standard
  • Complies with OSHA 1926:502 and ANSI Z-359.1-07
  • #1093 complies with Cal-OSHA Title 8 5,000 pounds no Permanent Deformation any Direction
  • Stud Bolt Models are NOT Specified for Window Washing
  • Product I.D. Label Packages attach via Through Bolt, Stud Bolt or Grommet/Tether

Window Washing Suspension: Roof and Wall Safety/Tie-Back Anchors for window washing suspension require special consideration. North America safety standards require a building to have certified anchorages capable of supporting the necessary loads before any worker suspends from the anchor. Our anchors can help you provide compliance with OSHA, ANSI and IWCA I-14.1 standards for window cleaning or any other job requiring suspension over the edge of the building.

Window Washing suspension requires 2 anchors for the worker to tie off to – one anchor supports the workers equipment and one anchor is used for the safety lifeline or fall arrest equipment. Our pre-engineered anchors give you the compliance that you need at an affordable cost. Our unique line of anchors can be mounted to roof decking, concrete curbs/beams/walls, steel beams as well as other structures capable of supporting the intended loads. The CRA's for window washing are designed for a 5,000-pound ultimate load, a 2,500-pound test load and a 1,250-pound allowable load. Parapet walls must be capable of supporting the intended loads, too.