All

Extremely heavy duty and strong, our wire rope anchors are fabricated with high strength 7×19 galvanized wire rope that is double swaged on each en...

Extremely heavy duty and strong, our wire rope anchors are fabricated with high strength 7×19 galvanized wire rope that is double swaged on each en...

Extremely heavy duty and strong, our wire rope anchors are fabricated with high strength 7×19 galvanized wire rope that is double swaged on each en...

Extremely heavy duty and strong, our wire rope anchors are fabricated with high strength 7×19 galvanized wire rope that is double swaged on each en...

The Vertical Wall anchors are designed for exterior wall applications as an overhead anchorage device that is nearly invisible from the ground. Fab...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s...

The Energy Absorber is one of the most critical components for fall protection and is required by OSHA when workers are exposed to a free fall haza...

The Super Anchor Swivel-D anchor is a fully articulating anchor that rotates 360-degrees and swivels 180-degrees. It can attach to virtually any st...

The Super Anchor Swivel-D anchor is a fully articulating anchor that rotates 360-degrees and swivels 180-degrees. It can attach to virtually any st...

The Super Bolt Temporary anchor is a concrete anchorage device for inserting into concrete structure. Drill a ¾” hole into the concrete, clean and ...

The Standing Seam Roof Anchor is a revolutionary product allowing roofing contractors, building owners and homeowners to work safely on standing se...

Small D-Ring Component. Zinc Coated, Proof Loaded to 3,600 pounds Proof Loaded to 3,600 Pounds Minimum Breaking Strength 5,000 pounds OSHA, ANSI a...

An exclusive Super Anchor Safety design. Our Sloped/Pitched roof CRA can be manufactured with the riser welded to the degree of anchor/slope of the...

This Pre-Engineered permanent flat/low-slope roof anchor is specified for use as a single user fall protection anchor point, a window-washing suspe...

A complete assembly of engineered components required to rig a HLLS (horizontal lifeline system). Designed specifically for use with SAS commercial...

The Evac (short for Evacuation) anchor is a temporary anchor that mounts onto the truss at framing, sticks up through the sheathing and is used to ...

ANSI Z359.13 Energy Absorber w/ 6ft Web Lanyard A-End Snaphook B-End Snaphook. 72" Service Length.  User Wt. 130-310lb The Energy Absorber is one o...

Our popular 80 pack now available with spiral nails and butyl flashing strips. The new OSHA Fall Protection Rules are now being enforced and the ro...

A Super Anchor exclusive design that allows up to 4 different horizontal lifeline components to be attached to a single anchor point. These are sup...

Galvanized or stainless-steel 3/8” cable rated for 14,000 pounds. Use in runs up to 120’ and in conjunction with the rigging kits.

This Pre-Engineered permanent flat/low-slope roof anchor is specified for use as a single user fall protection anchor point, a window-washing suspe...

This Pre-Engineered permanent flat/low-slope roof anchor is specified for use as a single user fall protection anchor point, a window-washing suspe...

Two of our most popular anchors, the D- and RS-10 can be mounted directly over existing asphalt shingle roofs without removing any shingles. To cov...