Super Anchor 24" CRA-W WW 24"x Schedule 80 x3.0" Riser, Loop Top. 16x16x5/8 Base

$450.00
SKU SAS1042-W
This Pre-Engineered permanent flat/low-slope roof anchor is specified for use as a single user fall protection anchor point, a window-washing suspension/tie-back anchor point or as a horizontal lifeline intermediate anchor. CRA Overview (see the Instruction/Specification Manual for details):

    DECKING ATTACHMENTS: Wood Decking, Metal Decking, Existing Concrete Decks, Pour-In Place Concrete Decks, Structural Wood Beams and Structural Steel
    ATTACHMENT HARDWARE: ½” Grade-8 Bolts, A-307 Threaded Rod, Concrete Wedge Anchors, #14 Hex Head Screws, HeadLok Screws and Field Welds
    ROOFING MATERIAL: Built-Up Roofing, Spray-On Roofing, Modified Bitumen Roofing, Green Roofs, PVC, EPDM, TPO, Asphalt Shingle Roofing, Corrugated and Standing Seam Metal Roofs
    FLASHING: provided by the roofing contractor or built on site and flashed as per standard procedures for a 3” or 4.5” OD pipe. A factory supplied 35-year EPDM flashing for metal roof applications is available.
    FALL PROTECTION CONFIGURATIONS:
  • Stand Alone Anchor/Tie-Back Anchors for Fall Protection
  • Roof Perimeter Cable Pass-Through systems
  • Roof Centerline Cable Pass-Through systems
  • Roof Perimeter Based Window Washing Tie-Back Anchors
  • Roof Centerline Based Window Washing Tie-Back Anchors

CRA End Anchors are pre-engineered for your project eliminating the need for expensive, time consuming specialized effort by GC’s, architects or engineers to provide a fall protection plan. SAS has extensive 3rd party engineering documents, installation details, testing data and installation guidance ready at your disposal. The CRA’s can be used as end anchors, intermediate anchors as part of a horizontal lifeline system or as stand-alone 360-degree single user tie-off. The extensive testing, engineering and design criteria that we have done gives us the opportunity to offer you a fall protection anchor system that can be installed by your trade partners at a fraction of the cost of most commercial roof anchor systems on the market today.

Available in riser heights from 8” – 36” tall. CRA’s with riser heights up to 18” are factory supplied with 40 ea. #14 hex-head self-drilling screws to fasten the anchor to wood or metal decking. CRA’s 24” and higher require bolts to fasten to the structure. These are not supplied by Super Anchor. Attachment details are found in the current Instruction/Specification Manual and are a minimum of 4 ea. ½” diameter x ___ grade 8 bolts, stainless steel bolts, concrete wedge anchors or A307 all-thread. Flashings for the CRA are either provided by the roofing contractor or built on site and flashed as per standard procedures for a 3” or 4.5” OD pipe. A factory supplied 35-year EPDM flashing for metal roof applications is available.

Each CRA anchor comes with a 4-page, comprehensive Instruction/Specification Manual to cover most installation options. See the Engineering tab for comprehensive design/testing/engineering documents.

  • Certified for Fall Protection and Window Washing
  • ASTM 123 Hot Dip Galvanized Coating
  • 5,000-pound Minimum Strength
  • Numerous Mounting Options Available
  • Stand Alone Anchors or Use in Horizontal Lifeline System up to 130’
  • Available in 304/316 Stainless Steel
  • Individual Serial Number Tag Riveted onto Riser
  • Large Inventory in Stock
  • Pre-Engineered Design for Easy Compliance

With over 25 years’ experience, super Anchor Safety is the industry leader for commercial Roof anchors and horizontal lifeline systems. Used primarily on low slope applications, anchors can be custom fabricated for attachment to any type of structural support and to any architectural requirement. Our time-tested anchor designs are cost effective, easy to install, low maintenance and feature state of the art precast loop tops and pass through connector fixtures. We stock all the horizontal lifeline accessories needed for your project including IWCA window washing and Cal-OSHA compliant roof anchors. We can also supply 100% USA Manufactured/Certified anchors. Our simple design backed up with a full regimen of engineering documents is a cost effective, easy to install, low maintenance permanent fall protection fixture.