Super Anchor Safety CRA D-Plate Anchor 6x6 D-Plate with 1090 Loop top (1037G)

$70.00
SKU SAS1037-G

The low-profile single user CRA D-Plate anchor is designed to be installed onto wood, steel, CMU walls, concrete embedded or concrete structure and can be utilized for fall protection, window washing suspension or as a horizontal lifeline intermediate anchor. This anchor comes pre-engineered to be installed with bolts, wedge anchors or field welds for installation on walls, floors, ceilings and other areas where applicable. It measures 6” x 6” and has our cast loop top welded to the plate.

The D-plate is not designed as a rooftop anchor point and does not come with fasteners to secure it. A variety of coatings/materials are available: galvanized, powder coated and stainless steel. Backer plates are also available.

Super Anchor 1037-G Installation Manual

  • STRUCTURE ATTACHMENTS: Wood Beams, Wood Trusses, Steel Decking, Structural Steel and Concrete
  • ATTACHMENT HARDWARE: ½” Grade-8 Bolts, A-307 Threaded Rod, Concrete Wedge Anchors and Field Welds
  • FALL PROTECTION CONFIGURATIONS:
Stand Alone Anchor/Tie-Back Anchors for Fall Protection
Cable Pass-Through systems
        Window Washing Tie-Back Anchors

CRA End Anchors are pre-engineered for your project eliminating the need for expensive, time consuming specialized effort by GC’s, architects or engineers to provide a fall protection plan. SAS has extensive 3rd party engineering documents, installation details, testing data and installation guidance ready at your disposal. The CRA’s can be used as end anchors, intermediate anchors as part of a horizontal lifeline system or as stand-alone 360-degree single user tie-off. The extensive testing, engineering and design criteria that we have done gives us the opportunity to offer you a fall protection anchor system that can be installed by your trade partners at a fraction of the cost of most commercial roof anchor systems on the market today.

Each CRA anchor comes with a 4-page, comprehensive Instruction/Specification Manual to cover most installation options. See the Engineering tab for comprehensive design/testing/engineering documents.

  • Certified for Fall Protection and Window Washing
  • Ideal for CMU Block Walls
  • Cal-OSHA Compliant Models Available
  • Complies with IWCA-14.1 Window Washing Standard outside of California (for Cal-OSHA WW anchors, see part number 1301-G)
  • ASTM 123 Hot Dip Galvanized Coating
  • 5,000-pound Minimum Strength
  • Numerous Mounting Options Available
  • Stand Alone Anchors or Use in Horizontal Lifeline System up to 130’
  • Available in 304/316 Stainless Steel
  • Individual Serial Number Tag Riveted onto Riser
  • Large Inventory in Stock
  • Pre-Engineered Design for Easy Compliance

Window Washing Suspension: Roof and Wall Safety/Tie-Back Anchors for window washing suspension require special consideration. North America safety standards require a building to have certified anchorages capable of supporting the necessary loads before any worker suspends from the anchor. Our anchors can help you provide compliance with OSHA, ANSI and IWCA I-14.1 standards for window cleaning or any other job requiring suspension over the edge of the building.

Window Washing suspension requires 2 anchors for the worker to tie off to – one anchor supports the workers equipment and one anchor is used for the safety lifeline or fall arrest equipment. Our pre-engineered anchors give you the compliance that you need at an affordable cost. Our unique line of anchors can be mounted to roof decking, concrete curbs/beams/walls, steel beams as well as other structures capable of supporting the intended loads. The CRA’s for window washing are designed for a 5,000-pound ultimate load, a 2,500-pound test load and a 1,250-pound allowable load. Parapet walls must be capable of supporting the intended loads, too.

With over 25 years’ experience, super Anchor Safety is the industry leader for commercial Roof anchors and horizontal lifeline systems. Used primarily on low slope applications, anchors can be custom fabricated for attachment to any tope of structural support and to any architectural requirement. Our time-tested anchor designs are cost effective, east to install, low maintenance and feature state of the art pre-cast loop tops and pass through connector fixtures. We stock all the horizontal lifeline accessories needed for your project including IWCA window washing and Cal-OSHA compliant roof anchors. We can also supply 100% USA Manufactured/Certified anchors. Our simple design backed up with a full regimen of engineering documents are a cost effective, east to install, low maintenance permanent fall protection fixture.