Cal-OSHA Window Washing Tie-Backs:

Super Anchor Safety offers 6 different models of fall protection anchors that meet the Cal-OSHA standard for window washing tie-back anchors:

  • CRA Series with Base Plate and Risers
  • CRA Weld-On Risers for Field Welding
  • D-Plate Anchor with Cast Loop Top
  • CRA Vault Anchor for Sub-Level and Wall Install Applications
  • CRA Cast Loop Top Weld-On Series
  • CRA Bolt-On Cast Loop Top Anchors

This page covers the CRA Cal-OSHA Weld-On Risers. We utilized our pre-engineered calculations and testing to determine the specifications needed to manufacture and offer a Cal-OSHA compliant 4.5” outside diameter, weld-on riser. There are 24 standard sizes and custom options to meet your needs. All risers are backed by 3rd party engineering calculations. Every Cal-OSHA anchor order is custom and manufactured to your exact needs. Please see the “Project Engineering” tab for more detailed information on all custom, project specific anchors made by Super Anchor Safety. More information on the Cal-OSHA Tie-Backs:

California has specific requirements for anchor points used for window washing suspension and buildings over 3 stories or 36’ tall. Every building constructed at those heights shall have roof tie-backs permanent installed at the roof level for the purpose of securing or tying back suspended scaffold hooks, clamps and safety lines. California Code of Regulations, Title 8, Article 5, Section 3291 mandates the inclusion of permanently installed anchor for the purpose of exterior building maintenance such as window washing. There are exceptions to the rule. Including permanent roof anchors will help protect all those working at height. The design standards for Cal-OSHA Compliant anchors are:

  • Roof Tie-Backs shall have at least a 2.0” inside diameter closed eye
  • Tie-back assembly shall be hot-dip galvanized or afforded equivalent corrosion resistance
  • Assembly and anchorage provisions adequate to sustain a 5,000-pound load applied in any direction without permanent deformation

These standards are stricter than the standard window washing regulations set forth by OSHA, ANSI and IWCA in the 49 other states. Zero deformation at a 5,000-pound load requires special consideration in the engineering, design and manufacturing of the anchor. The supporting structure needs additional attention in order to sustain these loads as well. Super Anchor Safety has a full plethora of engineering documents that allows us to manufacture Cal-OSHA compliant CRA anchors in heights up to 36” tall. The extensive 3rd party, pre-engineered anchors follow very strict designs to make sure that you are provided finished products that comply with the strict Cal-OSHA standards. These anchors can by installed on wood decking, wood beams, metal decking, steel structure and concrete structures.

  • Cal-OSHA Anchors are domestically made in USA
  • Anchors are guaranteed for 5,000 pounds with zero deformation in any direction
  • Extensive 3rd party Engineering, Calculations and Testing
  • 2.0” Cast Loop Top rated for over 10,000 pounds
  • 5,000 Pound zero deformation in any direction guaranteed
  • Riser Heights from 8" up to 36"
  • Attaches to Wood, Concrete, Steel and Metal Decking
  • Made from A-36 Steel HDG, 304 SST or 316 SST
Part # Riser Height Riser O.D. Weight Material Use Rating
1200 TBD TBD TBD Choose Field Weld riser, custom fabrication with 4.5" o.d. and Cast Loop Top 2.0"
1201-R 8" 4.5" 17 Raw Steel Raw Steel Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1201-G 8" 4.5" 17 HDG Steel HDG Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1201-S 8" 4.5" 17 304 SST 304 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1201-SX 8" 4.5" 17 316 SST 316 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1202-R 12" 4.5" 24 Raw Steel Raw Steel Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1202-G 12" 4.5" 24 HDG Steel HDG Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1202-S 12" 4.5" 24 304 SST 304 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1202-SX 12" 4.5" 24 316 SST 316 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1203-R 18" 4.5" 32 Raw Steel Raw Steel Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1203-G 18" 4.5" 32 HDG Steel HDG Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1203-S 18" 4.5" 32 304 SST 304 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1203-SX 18" 4.5" 32 316 SST 316 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1204-R 24" 4.5" 39 Raw Steel Raw Steel Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1204-G 24" 4.5" 39 HDG Steel HDG Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1204-S 24" 4.5" 39 304 SST 304 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1204-SX 24" 4.5" 39 316 SST 316 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1205-R 30" 4.5" 69 Raw Steel Raw Steel Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1205-G 30" 4.5" 69 HDG Steel HDG Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1205-S 30" 4.5" 69 304 SST 304 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1205-SX 30" 4.5" 69 316 SST 316 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1206-R 36" 4.5" 83 Raw Steel Raw Steel Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1206-G 36" 4.5" 83 HDG Steel HDG Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1206-S 36" 4.5" 83 304 SST 304 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made
1206-SX 36" 4.5" 83 316 SST 316 SST Riser for Field Weld, 2.0" ID Loop Top, Cal-OSHA Compliant. USA Made